计算溶液所需的质量、体积或浓度。
这是演示店铺,请务下单付款,避免造成你的财物损失。
为了获得访问"阿拉丁铁蛋"实时聊天框的流畅支持体验,建议您使用Chrome浏览器或选择360浏览器极速模式(如何切换极速模式?),感谢您选择我们!
货号 (SKU) | 包装规格 | 是否现货 | 价格 | 数量 |
---|---|---|---|---|
S487467-250g |
250g | 期货 | |
英文别名 | Dielectric ink, SunTronic DSU4606G |
---|---|
英文名称 | SunTronic® UV curing dielectric green for screen printing |
法律信息 | SunTronic is a registered trademark of Sun Chemical, Inc. |
储存温度 | 2-8°C储存 |
运输条件 | 冰袋运输 |
产品介绍 |
Description Drying/CuringDSU4606G can be cured with a 200-300 Watt/inch (80-120 Watt/cm) medium-pressure Mercury vapor arc lamps, or microwave initiated D-bulb equivalents. Optimum UV dosage should be around 650 mJ/cm2.DSU4606G is a flexible, green UV curing dielectric designed to be screen printed as an insulating layer for crossovers in membrane switches and a variety of electronic & Printed circuitry constructions.DSU4606G has excellent adhesion to both treated and untreated PET. It also adheres to a variety of substrates including PC, PI, glass, and ITO.Typical Cured Deposits:196 threads/inch (77 threads/cm): 0.6-0.8 mil305 threads/inch (120 threads/cm): 0.3-0.5 milDSU4606G must be shielded from sunlight or high-intensity light to prevent on-screen curing during prolonged production stoppages.Cleaning with thinner followed by cleaning with acetone is recommendedDSU4606G is supplied ready for use, but should be lightly stirred before use. It should not require reducing.DSU4606G is suitable for use on hand; semi-automatic or fully automatic screen printing machines. Polyester or Stainless screens with mesh count 196-305 threads/inch (77-120 threads/cm) can be used depending on desired ink film thickness. Printing two layers is recommended for maximum dielectric properties and to minimize voids. A total cured deposit of 0.75-2.0 mil may be required to meet specific insulation targets. Description Drying/CuringDSU4606G can be cured with a 200-300 Watt/inch (80-120 Watt/cm) medium-pressure Mercury vapor arc lamps, or microwave initiated D-bulb equivalents. Optimum UV dosage should be around 650 mJ/cm2.DSU4606G is a flexible, green UV curing dielectric designed to be screen printed as an insulating layer for crossovers in membrane switches and a variety of electronic & Printed circuitry constructions.DSU4606G has excellent adhesion to both treated and untreated PET. It also adheres to a variety of substrates including PC, PI, glass, and ITO.Typical Cured Deposits:196 threads/inch (77 threads/cm): 0.6-0.8 mil305 threads/inch (120 threads/cm): 0.3-0.5 milDSU4606G must be shielded from sunlight or high-intensity light to prevent on-screen curing during prolonged production stoppages.Cleaning with thinner followed by cleaning with acetone is recommendedDSU4606G is supplied ready for use, but should be lightly stirred before use. It should not require reducing.DSU4606G is suitable for use on hand; semi-automatic or fully automatic screen printing machines. Polyester or Stainless screens with mesh count 196-305 threads/inch (77-120 threads/cm) can be used depending on desired ink film thickness. Printing two layers is recommended for maximum dielectric properties and to minimize voids. A total cured deposit of 0.75-2.0 mil may be required to meet specific insulation targets. |
输入批号以搜索COA: